import os
import subprocess

from amaranth.build import *
from amaranth.vendor.intel import *
from .resources import *


__all__ = ["MisterPlatform"]


# The MiSTer platform is built around the DE10-Nano; if you update one you should update the other.
class MisterPlatform(IntelPlatform):
    device      = "5CSEBA6" # Cyclone V 110K LEs
    package     = "U23"     # UBGA-484
    speed       = "I7"
    default_clk = "clk50"
    resources   = [
        Resource("clk50", 0, Pins("V11", dir="i"),
                 Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
        Resource("clk50", 1, Pins("Y13", dir="i"),
                 Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
        Resource("clk50", 2, Pins("E11", dir="i"),
                 Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),

        *LEDResources(
            pins="W15 AA24 V16 V15 AF26 AE26 Y16 AA23",
            attrs=Attrs(io_standard="3.3-V LVTTL")),
        *ButtonResources(
            pins="AH17 AH16", invert=True,
            attrs=Attrs(io_standard="3.3-V LVTTL")),
        *SwitchResources(
            pins="Y24 W24 W21 W20",
            attrs=Attrs(io_standard="3.3-V LVTTL")),

        # Arduino header
        UARTResource(0,
            rx="AG13", tx="AF13",
            attrs=Attrs(io_standard="3.3-V LVTTL")),

        # LTC2308 analogue-to-digital converter
        SPIResource(0,
            cs_n="U9", clk="V10", copi="AC4", cipo="AD4",
            attrs=Attrs(io_standard="3.3-V LVTTL")),

        # ADV7513 HDMI transmitter
        # Note this has a lot of input formats for tx_d, but this defaults to RGB24
        Resource("adv7513", 0,
            Subsignal("tx_d_r", Pins("AD12 AE12 W8   Y8   AD11 AD10 AE11 Y5", dir="o")),
            Subsignal("tx_d_g", Pins("AF10 Y4   AE9  AB4  AE7  AF6  AF8  AF5", dir="o")),
            Subsignal("tx_d_b", Pins("AE4  AH2  AH4  AH5  AH6  AG6  AF9  AE8", dir="o")),
            Subsignal("tx_clk", Pins("AG5", dir="o")),
            Subsignal("tx_de", Pins("AD19", dir="o")),
            Subsignal("tx_hs", Pins("T8", dir="o")),
            Subsignal("tx_vs", Pins("V13", dir="o")),
            Subsignal("tx_int", Pins("AF11", dir="i")),
            Subsignal("i2s0", Pins("T13", dir="o")),
            Subsignal("mclk", Pins("U11", dir="o")),
            Subsignal("lrclk", Pins("T11", dir="o")),
            Subsignal("sclk", Pins("T12", dir="o")),
            Subsignal("scl", Pins("U10", dir="o")),
            Subsignal("sda", Pins("AA4", dir="io")),
            Attrs(io_standard="3.3-V LVTTL")),

        # MiSTer SDRAM Board (required)
        # https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xs_2.2.pdf
        SDRAMResource(0,
            clk="20", cs_n="33", we_n="27", ras_n="32", cas_n="31",
            ba="34 35", a="37 38 39 40 28 25 26 23 24 21 36 22 19",
            dq="1 2 3 4 5 6 7 8 18 17 16 15 14 13 9 10",
            dqm="", conn=("gpio", 0), attrs=Attrs(io_standard="3.3-V LVCMOS")),

        # MiSTer I/O Board (optional, but highly recommended)
        # https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/iobrd_6.0.pdf
        Resource("power_led", 0, PinsN("1", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
        Resource("disk_led", 0, PinsN("3", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
        Resource("user_led", 0, PinsN("5", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),

        Resource("reset_switch", 0, PinsN("17", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
        Resource("osd_switch", 0, PinsN("13", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
        Resource("user_switch", 0, PinsN("15", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),

        Resource("audio", 0,
            Subsignal("l", Pins("2", dir="o", conn=("gpio", 1))),
            Subsignal("r", Pins("7", dir="o", conn=("gpio", 1))),
            Attrs(io_standard="3.3-V LVTTL")),

        Resource("toslink", 0, Pins("9", dir="o", conn=("gpio", 1))),

        *SDCardResources(0,
            clk="13", cmd="8", 
            dat0="16", dat1="18", dat2="4", dat3="6",
            conn=("gpio", 1), attrs=Attrs(io_standard="3.3-V LVTTL")),

        # The schematic is difficult to understand here...
        VGAResource(0,
            r="28 32 34 36 38 40",
            g="27 31 33 35 37 39",
            b="21 23 25 26 24 24",
            hs="20", vs="19",
            conn=("gpio", 1),
            attrs=Attrs(io_standard="3.3-V LVTTL"))
    ]
    connectors  = [
        # Located on the top of the board, above the chip.
        Connector("gpio", 0,
            "V12  E8   W12  D11  D8   AH13 AF7  AH14 AF4  AH3  "
            "-    -    AD5  AG14 AE23 AE6  AD23 AE24 D12  AD20 "
            "C12  AD17 AC23 AC22 Y19  AB23 AA19 W11  -    -    "
            "AA18 W14  Y18  Y17  AB25 AB26 Y11  AA26 AA13 AA11 "),
        # Located on the bottom of the board.
        Connector("gpio", 1,
            "Y15  AC24 AA15 AD26 AG28 AF28 AE25 AF27 AG26 AH27 "
            "-    -    AG25 AH26 AH24 AF25 AG23 AF23 AG24 AH22 "
            "AH21 AG21 AH23 AA20 AF22 AE22 AG20 AF21 -    -    "
            "AG19 AH19 AG18 AH18 AF18 AF20 AG15 AE20 AE19 AE17 "),
        Connector("arduino", 0,
            "AG13 AF13 AG10 AG9  U14  U13  AG8  AH8  "
            "AF17 AE15 AF15 AG16 AH11 AH12 AH9  AG11 "
            "AH7"),
    ]

    def toolchain_program(self, products, name):
        quartus_pgm = os.environ.get("QUARTUS_PGM", "quartus_pgm")
        with products.extract("{}.sof".format(name)) as bitstream_filename:
            # The @2 selects the second device in the JTAG chain, because this chip
            # puts the ARM cores first.
            subprocess.check_call([quartus_pgm, "--haltcc", "--mode", "JTAG",
                                   "--operation", "P;" + bitstream_filename + "@2"])


if __name__ == "__main__":
    from .test.blinky import Blinky
    MisterPlatform().build(Blinky(), do_program=True)