Roflin/rebbarb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

gc_bba_test: add raw slot dumps to locate the response

Browse Source 
Reading one byte and getting 0x00 cannot distinguish 'decode is wrong' from
'reply is late' -- a one-byte window has nowhere for a late answer to show up.
These two probes clock EIGHT data bytes and print every slot, so the position
of 0x17 (NWAYS) or 0x04 (device ID) gives the latency directly, the same way
bit-shift analysis turned 00 00 00 10 into 'correct, 22 bits late'.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
Dennis Brentjes
2026-10-03 12:46:46 +02:00
parent e682fded4a
commit 6f151cd1ff
3 changed files with 48 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
gc_bba_test/source/tests.c
+38 -1
View File
@@ -186,6 +186,41 @@ static int t_gap_sweep(char *m, size_t n)
return 0;
}
static int t_raw_reg(char *m, size_t n)
{
/* Clock EIGHT data bytes for a one-byte register read and show them all.
* A correct device puts NWAYS (0x17) in slot 0. If it shows up later the
* reply is merely LATE and the slot index gives the latency directly; if
* it never appears the decode is wrong, not slow. */
u8 b[8];
int i, at = -1;
if (bba_read(REG_NWAYS, b, sizeof(b)) < 0) { snprintf(m, n, "EXI error"); return 1; }
for (i = 0; i < 8; i++) if (b[i] == NWAYS_LINKUP) { at = i; break; }
snprintf(m, n, "%02X %02X %02X %02X %02X %02X %02X %02X | 0x17 %s%d",
b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7],
at < 0 ? "absent" : "at slot ", at < 0 ? 0 : at);
return at == 0 ? 0 : 1;
}
static int t_raw_id(char *m, size_t n)
{
/* Same for the device ID: 2-byte header, then clock 8 instead of 4. */
u8 b[8];
int i, at = -1, rc;
u16 h = 0x0000;
if ((rc = begin_raw()) < 0) { snprintf(m, n, "EXI error %d", rc); return 1; }
EXI_Imm(BBA_EXI_CHAN, &h, 2, EXI_WRITE, NULL);
EXI_Sync(BBA_EXI_CHAN);
memset(b, 0, sizeof(b));
EXI_ImmEx(BBA_EXI_CHAN, b, sizeof(b), EXI_READ);
end_raw();
for (i = 0; i < 8; i++) if (b[i] == 0x04) { at = i; break; }
snprintf(m, n, "%02X %02X %02X %02X %02X %02X %02X %02X | 0x04 %s%d",
b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7],
at < 0 ? "absent" : "at slot ", at < 0 ? 0 : at);
return at == 0 ? 0 : 1;
}
/* ───────────────────────── suite 5: ethernet ───────────────────────── */
static u8 g_mac[6] = {0x00,0x09,0xBF,0x00,0x00,0x01};
@@ -324,6 +359,8 @@ static test_t s_exi[] = {
{"200x read", "no bit errors over 200 register reads", t_repeat, T_PENDING, {0}},
{"Speed sweep", "which EXI clock indices are reliable (0..5)", t_speed_sweep, T_PENDING, {0}},
{"Gap sweep", "min header->data idle gap the device needs", t_gap_sweep, T_PENDING, {0}},
{"Raw reg dump", "8 slots of a NWAYS read - WHERE does 0x17 land?", t_raw_reg, T_PENDING, {0}},
{"Raw ID dump", "8 slots of the device-ID query - where is 0x04?", t_raw_id, T_PENDING, {0}},
};
static test_t s_eth[] = {
{"MAC readback", "PAR0-5 hold a Nintendo-OUI MAC", t_mac_read, T_PENDING, {0}},
@@ -339,7 +376,7 @@ suite_t g_suites[] = {
{"Identity", "device enumerates and reports itself", s_identity, 3},
{"Registers", "register file is readable and writable", s_regs, 4},
{"Reset/control", "NCRA reset and control bits behave", s_reset, 2},
{"EXI integrity", "the EXI link is error-free, and how fast", s_exi, 3},
{"EXI integrity", "the EXI link is error-free, and how fast", s_exi, 5},
{"Ethernet", "frames get to and from the W5100", s_eth, 3},
{"SPRAM/DMA", "bulk reads stream correctly from the ring", s_spram, 2},
};