fix(efuse): connect U13's exposed thermal pad to GND

The TPS25961's exposed pad is GND and the datasheet requires it be connected
to the GND plane (Table 5-1; package note 3 adds a mechanical requirement).
REVIEW.md claimed this was honoured because the footprint is the _ThermalVias
variant -- but the variant alone connects nothing.  hardware/TPS25961.kicad_sym
defined pins 1-6 only, with no pin for the exposed pad, so KiCad had nothing to
map onto footprint pad 7 and left it netless: an isolated copper island under
the chip with its thermal vias going nowhere.

Adds pin 7 (GND, power_in, hidden, stacked on pin 4) to the symbol library, the
cached symbol in exi.kicad_sch, and the U13 instance.

PCB updated and verified: U13 pad 7 carries GND on all four elements (both SMD
rects and both thermal vias), R48 placed, EFUSE_OVLO routed, R49 gone.  DRC
reports 0 violations, 0 unconnected pads and 0 schematic parity issues -- the
0-unconnected result is what confirms pad 7 is tied into the GND network rather
than merely labelled.  The 4 DRC errors previously dismissed as zone-fill
phantoms on this pad are gone, though zones were refilled in the same pass so
that is not proof of cause either way.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

hardware/re-bba-rb/exi.kicad_sch

@@ -1313,6 +1313,25 @@
 						)
 					)
 				)
+				(pin power_in line
+					(at 0 -17.78 90)
+					(length 5.08)
+					(hide yes)
+					(name "GND"
+						(effects
+							(font
+								(size 1.27 1.27)
+							)
+						)
+					)
+					(number "7"
+						(effects
+							(font
+								(size 1.27 1.27)
+							)
+						)
+					)
+				)
 				(pin input line
 					(at -15.24 0 0)
 					(length 5.08)
@@ -3212,6 +3231,9 @@
 		(pin "6"
 			(uuid "261b68e5-edb3-425a-b550-6416e801c1f3")
 		)
+		(pin "7"
+			(uuid "379caeec-e2fa-4b96-9dac-3674b3d9eb77")
+		)
 		(instances
 			(project "re-bba-rb"
 				(path "/dbb182a6-d579-468e-b98b-6f0950da9e3a/1b071f68-b4ea-469c-942f-de06380c9077"