The W5100ParallelMaster used the original W5100's TX (0x4000) / RX (0x6000)
memory-block base addresses. This board's chip is a W5100S, whose TX/RX memory
blocks live at 0x8000 / 0xC000 (datasheet: TX 0x8000-0xBFFF, RX 0xC000-0xFFFF).
Consequence found at hardware bring-up (2026-09-20): every frame was written to
dead address space, so SEND transmitted the (empty) real TX buffer -- the chip
reported "sent" but nothing valid reached the wire (peer rx_packets stayed 0,
link up). The sim bus-model used these same constants, so it never caught it --
exactly the "register addresses are datasheet-from-memory, confirm at bring-up"
risk. All socket register offsets were verified correct against the W5100S
datasheet; only the two memory bases were wrong. Fixes both the socket-N UDP
test and the socket-0 MACRAW (GC) path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RoflinandClaude Opus 4.8
162dbf7d5f