rebbarb

Files

T

Roflin fa8fbc35e7 PCB rework: place and route MDI termination + FTDI EEPROM resistors

Rework by Dennis; reviewed with DRC 0 errors / 0 unconnected / 0 parity:
- R26-R29 + C18/C19 at U11's MDI edge (1-3mm from pins), short stubs,
  ETH_DP impedance rules pass, pair skew TX 0.30mm / RX 0.72mm
- D4/D5 true flow-through (PHY side faces U11, cable side faces J2)
- In1 GND plane voided under the magjack cable/isolation side
- R30/R31 placed at U7; 30 GND stitch vias in the ethernet corner

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

2026-07-18 14:01:16 +00:00

re-bba-rb

PCB rework: place and route MDI termination + FTDI EEPROM resistors

2026-07-18 14:01:16 +00:00

sp1_test_plug

Started on component selection of the final PCB.

2026-06-13 22:09:05 +02:00

.gitignore

Start of a new debug connector

2025-09-19 12:06:05 +02:00

HANRUN_HR911105A.kicad_mod

Played around with board shape/layout Changed USB power tree