168 lines
7.0 KiB
Python
168 lines
7.0 KiB
Python
import os
|
|
import subprocess
|
|
|
|
from amaranth.build import *
|
|
from amaranth.vendor.lattice_ecp5 import *
|
|
from .resources import *
|
|
|
|
|
|
__all__ = ["Supercon19BadgePlatform"]
|
|
|
|
|
|
class Supercon19BadgePlatform(LatticeECP5Platform):
|
|
device = "LFE5U-45F"
|
|
package = "BG381"
|
|
speed = "8"
|
|
default_clk = "clk8"
|
|
|
|
# The badge's LEDs are wired in a non-straightforward way. Here, the
|
|
# LEDResources represent each of the common anodes of a collection of RGB LEDs.
|
|
# A single one of their cathodes defaults to connected via a FET; the other
|
|
# cathodes are normally-off. Accordingly, they act as normal single-color LEDs
|
|
# unless the cathode signals are explicitly driven.
|
|
#
|
|
# The LEDs on the badge were meant to be a puzzle; so each cathode signal
|
|
# corresponds to a different color on each LED. This means there's no
|
|
# straightforward way of creating pin definitions; you'll need to use the
|
|
# following mapping to find the cathode pin number below.
|
|
led_cathode_mappings = [
|
|
{'r': 0, 'g': 1, 'b': 2}, # LED1: by default, red
|
|
{'r': 2, 'g': 1, 'b': 0}, # LED2: by default, blue
|
|
{'r': 0, 'g': 1, 'b': 2}, # LED3: by default, red
|
|
{'r': 2, 'g': 1, 'b': 0}, # LED4: by default, blue
|
|
{'r': 0, 'g': 1, 'b': 2}, # LED5: by default, red
|
|
{'r': 2, 'g': 1, 'b': 0}, # LED6: by default, blue
|
|
{'r': 2, 'g': 0, 'b': 1}, # LED7: by default, green
|
|
{'r': 0, 'g': 1, 'b': 2}, # LED8: by default, red
|
|
{'r': 0, 'g': 1, 'b': 2}, # LED9: by default, red
|
|
# Note: [LED10 is disconnected by default; bridge R60 to make things work]
|
|
{'r': 2, 'g': 1, 'b': 0}, # LED10: by default, blue
|
|
{'r': 1, 'g': 0, 'b': 2}, # LED11: by default, green
|
|
]
|
|
|
|
resources = [
|
|
Resource("clk8", 0, Pins("U18"), Clock(8e6), Attrs(IO_TYPE="LVCMOS33")),
|
|
|
|
# Used to trigger FPGA reconfiguration.
|
|
Resource("program", 0, PinsN("R1"), Attrs(IO_TYPE="LVCMOS33")),
|
|
|
|
# See note above for LED anode/cathode information.
|
|
# Short version is: these work as normal LEDs until you touch their cathodes.
|
|
*LEDResources(pins="E3 D3 C3 C4 C2 B1 B20 B19 A18 K20 K19",
|
|
attrs=Attrs(IO_TYPE="LVCMOS33")),
|
|
Resource("led_cathodes", 0, Pins("P19 L18 K18"), Attrs(IO_TYPE="LVCMOS33")),
|
|
|
|
UARTResource(0, rx="U2", tx="U1", attrs=Attrs(IO_TYPE="LVCMOS33")),
|
|
|
|
DirectUSBResource(0, d_p="F3", d_n="G3", pullup="E4", vbus_valid="F4",
|
|
attrs=Attrs(IO_TYPE="LVCMOS33")),
|
|
|
|
# Buttons, with semantic aliases.
|
|
*ButtonResources(pins="G2 F2 F1 C1 E1 D2 D1 E2",
|
|
attrs=Attrs(IO_TYPE="LVCMOS33", PULLMODE="UP")
|
|
),
|
|
Resource("keypad", 0,
|
|
Subsignal("left", Pins("G2", dir="i")),
|
|
Subsignal("right", Pins("F2", dir="i")),
|
|
Subsignal("up", Pins("F1", dir="i")),
|
|
Subsignal("down", Pins("C1", dir="i")),
|
|
Subsignal("start", Pins("E1", dir="i")),
|
|
Subsignal("select",Pins("D2", dir="i")),
|
|
Subsignal("a", Pins("D1", dir="i")),
|
|
Subsignal("b", Pins("E2", dir="i")),
|
|
Attrs(IO_TYPE="LVCMOS33", PULLMODE="UP")
|
|
),
|
|
|
|
# Direct HDMI on the bottom of the board.
|
|
Resource("hdmi", 0,
|
|
Subsignal("clk", DiffPairsN("P20", "R20"), Attrs(IO_TYPE="TMDS_33")),
|
|
Subsignal("d", DiffPairs("N19 L20 L16", "N20 M20 L17"), Attrs(IO_TYPE="TMDS_33")),
|
|
Subsignal("hpd", PinsN("R18"), Attrs(IO_TYPE="LVCMOS33")),# Also called HDMI_HEAC_n
|
|
Subsignal("hdmi_heac_p", PinsN("T19"), Attrs(IO_TYPE="LVCMOS33")),
|
|
Attrs(DRIVE="4"),
|
|
),
|
|
|
|
Resource("lcd", 0,
|
|
Subsignal("db",
|
|
Pins("J3 H1 K4 J1 K3 K2 L4 K1 L3 L2 M4 L1 M3 M1 N4 N2 N3 N1"),
|
|
),
|
|
Subsignal("rd", Pins("P2")),
|
|
Subsignal("wr", Pins("P4")),
|
|
Subsignal("rs", Pins("P1")),
|
|
Subsignal("cs", Pins("P3")),
|
|
Subsignal("id", Pins("J4")),
|
|
Subsignal("rst", Pins("H2")),
|
|
Subsignal("fmark", Pins("G1")),
|
|
Subsignal("blen", Pins("P5")),
|
|
Attrs(IO_TYPE="LVCMOS33")
|
|
),
|
|
|
|
Resource("spi_flash", 0, # clock needs to be accessed through USRMCLK
|
|
Subsignal("cs", PinsN("R2")),
|
|
Subsignal("copi", Pins("W2")),
|
|
Subsignal("cipo", Pins("V2")),
|
|
Subsignal("wp", Pins("Y2")),
|
|
Subsignal("hold", Pins("W1")),
|
|
Attrs(IO_TYPE="LVCMOS33")
|
|
),
|
|
Resource("spi_flash_4x", 0, # clock needs to be accessed through USRMCLK
|
|
Subsignal("cs", PinsN("R2")),
|
|
Subsignal("dq", Pins("W2 V2 Y2 W1")),
|
|
Attrs(IO_TYPE="LVCMOS33")
|
|
),
|
|
|
|
# SPI-connected PSRAM.
|
|
Resource("spi_psram_4x", 0,
|
|
Subsignal("cs", PinsN("D20")),
|
|
Subsignal("clk", Pins("E20")),
|
|
Subsignal("dq", Pins("E19 D19 C20 F19"), Attrs(PULLMODE="UP")),
|
|
Attrs(IO_TYPE="LVCMOS33", SLEWRATE="SLOW")
|
|
),
|
|
Resource("spi_psram_4x", 1,
|
|
Subsignal("cs", PinsN("F20")),
|
|
Subsignal("clk", Pins("J19")),
|
|
Subsignal("dq", Pins("J20 G19 G20 H20"), Attrs(PULLMODE="UP")),
|
|
Attrs(IO_TYPE="LVCMOS33", SLEWRATE="SLOW")
|
|
),
|
|
|
|
SDRAMResource(0, clk="D11", cke="C11", cs_n="C7", we_n="B6", ras_n="D6", cas_n="A6",
|
|
ba="A7 C8", a="A8 D9 C9 B9 C14 E17 A12 B12 H17 G18 B8 A11 B11",
|
|
dq="C5 B5 A5 C6 B10 C10 D10 A9", dqm="A10",
|
|
attrs=Attrs(IO_TYPE="LVCMOS33", SLEWRATE="FAST")
|
|
)
|
|
]
|
|
|
|
connectors = [
|
|
Connector("pmod", 0, "A15 C16 A14 D16 B15 C15 A13 B13"),
|
|
Connector("cartridge", 0,
|
|
"- - - - - - - - C5 B5 A5 C6 B6 A6 D6 C7 A7 C8 B8 A8 D9 C9 B9 A9" # continued:
|
|
" D10 C10 B10 A10 D11 C11 B11 A11 G18 H17 B12 A12 E17 C14"
|
|
),
|
|
|
|
# SAO connectors names are compliant with the, erm, SAO 1.69 X-TREME standard.
|
|
# See: https://hackaday.com/2019/03/20/introducing-the-shitty-add-on-v1-69bis-standard/
|
|
Connector("sao", 0, {
|
|
"sda": "B3", "scl": "B2", "gpio0": "A2",
|
|
"gpio1": "A3", "gpio2": "B4", "gpio3": "A4"
|
|
}),
|
|
Connector("sao", 1, {
|
|
"sda": "A16", "scl": "B17", "gpio0": "B18",
|
|
"gpio1": "A17", "gpio2": "B16", "gpio3": "C17"
|
|
})
|
|
]
|
|
|
|
def toolchain_prepare(self, fragment, name, **kwargs):
|
|
overrides = dict(ecppack_opts="--compress --freq 38.8")
|
|
overrides.update(kwargs)
|
|
return super().toolchain_prepare(fragment, name, **overrides, **kwargs)
|
|
|
|
def toolchain_program(self, products, name):
|
|
dfu_util = os.environ.get("DFU_UTIL", "dfu-util")
|
|
with products.extract("{}.bit".format(name)) as bitstream_filename:
|
|
subprocess.check_call([dfu_util, "-d", "1d50:614b", "-a", "0", "-D", bitstream_filename])
|
|
|
|
|
|
if __name__ == "__main__":
|
|
from .test.blinky import *
|
|
Supercon19BadgePlatform().build(Blinky(), do_program=True)
|