Commit Graph

1 Commits

Author SHA1 Message Date
Roflin b438960eb5 Add self-update over the BBA: receive a .dol and relaunch into it
Copying to SD and rebooting is now the slowest part of the loop.  Z in the
test app pulls a new .dol over the adapter and launches it.

Deliberately NOT built on an IP stack.  Frames carry a private ethertype
(0x88B5, IEEE 802 local experimental 1) and a 12-byte header, so there is no
ARP, no IP, no checksums, and no libogc network driver competing with our raw
driver for the EXI channel.  It reuses exactly the two paths the suite already
proves on hardware: bba_tx_bytes() for TX and the SPRAM ring at RRP for RX.
A side benefit is that each update is a few hundred round trips through that
path -- a soak test we did not have.

STOP-AND-WAIT is load-bearing, not laziness.  The gateware does not consume
RRP, so RXFrameAssembler can overwrite ring pages the GC has not read yet;
there is no overflow protection.  One block in flight means the ring never
holds more than one unread frame, so the missing protection cannot bite.  Both
the header and the README say not to make this a sliding window without adding
RBFI-style protection first.

Failure behaviour, so a bad update never costs a power cycle:
  - 30 s idle with no frames, or 5 s mid-transfer, aborts to the menu rather
    than hanging.
  - A duplicate block is RE-ACKed rather than ignored, because a duplicate
    means our previous ACK was lost and re-ACKing is what lets the host move
    on.
  - netboot_receive() re-asserts the NCRA SR bit first: an earlier test may
    have left receive disabled, and then this would wait forever for frames
    the gateware is not storing.
  - netboot_launch() refuses an image whose entry point or first text section
    is not in MEM1 instead of jumping into a mis-parsed header.

The jump itself is the one unavoidable risk: once sections are copied and
interrupts are off, a bad image hangs the console hard enough to need a power
cycle.  The MEM1 check is what stands between a truncated transfer and that.

Host side is scripts/send-dol.py (AF_PACKET, needs sudo).  The GC's MAC is
discovered from its first ACK, so neither side needs an address configured.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-10-09 11:08:48 +02:00