Roflin
d8725392a5
libogc's EXI functions return '1 on success, <=0 on error', but every call site tested '== 0'. A -1 error return therefore read as success, so a failed EXI_Lock or EXI_Select would fall through and the subsequent transfer would produce garbage reported as a misleading test failure rather than an EXI error. All six call sites now test <= 0. Also retries EXI_Lock for ~100 ms: it fails outright rather than blocking when another subsystem holds the channel, and Swiss or a libogc driver may hold it briefly -- without the retry a transient collision surfaces as a test failure. Builds clean with devkitPPC 16.1.0 / GCC 16, no warnings: 172 KB .dol. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
105 lines
4.6 KiB
Docker
105 lines
4.6 KiB
Docker
# devkitPro's official image, used only as a source for the GameCube toolchain
|
|
# (see the devkitPPC section below). `:latest` tracks devkitPro releases; pin a
|
|
# dated tag (e.g. :20250527) if a toolchain update ever breaks the build.
|
|
FROM devkitpro/devkitppc:latest AS devkitppc
|
|
|
|
FROM debian:sid-slim
|
|
|
|
RUN apt-get update && apt-get install -y --no-install-recommends \
|
|
ca-certificates \
|
|
curl \
|
|
git \
|
|
git-lfs \
|
|
make \
|
|
sudo \
|
|
python3 \
|
|
python3-venv \
|
|
python3-pip \
|
|
yosys \
|
|
nextpnr-ice40 \
|
|
fpga-icestorm \
|
|
libusb-1.0-0 \
|
|
libftdi1-2 \
|
|
tshark \
|
|
nodejs npm \
|
|
graphviz \
|
|
poppler-utils \
|
|
kicad \
|
|
kicad-libraries \
|
|
&& rm -rf /var/lib/apt/lists/*
|
|
# libusb-1.0-0 + libftdi1-2: USB backend for `iceprog` (FPGA flash) and `pyftdi`
|
|
# (FT2232H EEPROM). sudo: the /dev/bus/usb nodes are root-owned, so the vscode
|
|
# user flashes via `sudo` (NOPASSWD, configured below).
|
|
|
|
ENV TZ="Europe/Amsterdam"
|
|
|
|
# Debian marks the system Python as externally-managed (PEP 668), so install
|
|
# project deps into a venv. /opt/venv is first on PATH, so `python`/`pip` resolve
|
|
# to it for all users.
|
|
ENV VIRTUAL_ENV=/opt/venv
|
|
RUN python3 -m venv "$VIRTUAL_ENV"
|
|
ENV PATH="$VIRTUAL_ENV/bin:$PATH"
|
|
|
|
# ENV PATH alone is not enough: Debian's /etc/profile REsets PATH unconditionally,
|
|
# so any *login* shell (VS Code's integrated terminal, `su - vscode`, ssh) drops
|
|
# /opt/venv/bin and then `python` does not exist at all (slim has only python3).
|
|
# Re-prepend the venv for login shells so the documented `python -m exi_bba.synth`
|
|
# works everywhere.
|
|
RUN printf 'PATH="%s/bin:$PATH"\nexport PATH\n' "$VIRTUAL_ENV" > /etc/profile.d/10-venv.sh
|
|
|
|
RUN npm install -g @anthropic-ai/claude-code
|
|
|
|
COPY requirements.txt /tmp/requirements.txt
|
|
RUN pip install --no-cache-dir -r /tmp/requirements.txt
|
|
|
|
# pyftdi: programs the FT2232H EEPROM over libusb, and (with pyserial) reads the
|
|
# FT2232H channel-B UART directly over libusb for bring-up diagnostics.
|
|
RUN pip install --no-cache-dir pyftdi pyserial
|
|
|
|
# ── GameCube homebrew toolchain (devkitPPC + libogc) ────────────────────────
|
|
# Needed to build the on-console BBA test app in `gc_bba_test/` into a .dol.
|
|
#
|
|
# Copied out of devkitPro's official `devkitpro/devkitppc` image rather than
|
|
# installed with their `install-devkitpro-pacman` script: apt.devkitpro.org and
|
|
# pkg.devkitpro.org sit behind Cloudflare, which answers curl/wget/scripted
|
|
# fetches with HTTP 403 (browser user-agents get 200) -- from the host's
|
|
# `docker build` too, not just from inside the container. The Docker image is
|
|
# devkitPro's sanctioned route for CI/containers and needs no network access to
|
|
# their hosts. The binaries only link against libc, so they run fine on sid.
|
|
#
|
|
# Only the GameCube/PPC parts are copied (~540 MB); devkitARM, wut and the
|
|
# Wii/Wii U portlibs from the source image are skipped.
|
|
COPY --from=devkitppc /opt/devkitpro/devkitPPC /opt/devkitpro/devkitPPC
|
|
COPY --from=devkitppc /opt/devkitpro/libogc /opt/devkitpro/libogc
|
|
COPY --from=devkitppc /opt/devkitpro/tools /opt/devkitpro/tools
|
|
COPY --from=devkitppc /opt/devkitpro/cmake /opt/devkitpro/cmake
|
|
COPY --from=devkitppc /opt/devkitpro/licenses /opt/devkitpro/licenses
|
|
COPY --from=devkitppc /opt/devkitpro/portlibs/ppc /opt/devkitpro/portlibs/ppc
|
|
COPY --from=devkitppc /opt/devkitpro/portlibs/gamecube /opt/devkitpro/portlibs/gamecube
|
|
|
|
ENV DEVKITPRO=/opt/devkitpro
|
|
ENV DEVKITPPC=/opt/devkitpro/devkitPPC
|
|
ENV PATH="$DEVKITPPC/bin:$DEVKITPRO/tools/bin:$PATH"
|
|
|
|
# Same /etc/profile PATH-reset problem as the venv above: login shells drop the
|
|
# ENV PATH, and devkitPro's Makefiles resolve $(DEVKITPPC)/bin from the
|
|
# environment, so export all three for login shells too.
|
|
RUN printf 'export DEVKITPRO=/opt/devkitpro\nexport DEVKITPPC=/opt/devkitpro/devkitPPC\nPATH="$DEVKITPPC/bin:$DEVKITPRO/tools/bin:$PATH"\nexport PATH\n' \
|
|
> /etc/profile.d/20-devkitpro.sh
|
|
|
|
RUN useradd -m -u 1000 -s /bin/bash vscode \
|
|
&& echo 'vscode ALL=(ALL) NOPASSWD:ALL' > /etc/sudoers.d/vscode \
|
|
&& chmod 0440 /etc/sudoers.d/vscode
|
|
|
|
USER vscode
|
|
|
|
# KiCad global library tables (copied from the installed templates) so kicad-cli
|
|
# can run the library-parity DRC/ERC checks. Without these, every standard
|
|
# footprint/symbol reports "library not configured". KiCad's built-in defaults
|
|
# resolve the ${KICAD10_*_DIR} paths inside the templates, so no env vars needed.
|
|
RUN mkdir -p /home/vscode/.config/kicad/10.0 \
|
|
&& cp /usr/share/kicad/template/fp-lib-table /home/vscode/.config/kicad/10.0/fp-lib-table \
|
|
&& cp /usr/share/kicad/template/sym-lib-table /home/vscode/.config/kicad/10.0/sym-lib-table
|
|
|
|
WORKDIR /workspace
|