rebbarb/gc_bba_test/source/netboot.c

#include "netboot.h"
#include "bba.h"
#include <stdio.h>
#include <string.h>
#include <malloc.h>
#include <unistd.h>
#include <ogc/lwp_watchdog.h>
#include <ogc/cache.h>
#include <fat.h>
#include <sdcard/gcsd.h>

/* ── frame layout ────────────────────────────────────────────────────────
 *  0  dst MAC (6)
 *  6  src MAC (6)
 * 12  ethertype (2) = NB_ETHERTYPE
 * 14  magic (4) = "GCUP"
 * 18  opcode (1)
 * 19  reserved (1)
 * 20  seq (2, big endian)
 * 22  nblocks (2, big endian)
 * 24  len (2, big endian)
 * 26  data (len)
 */
#define NB_HDR      26u
#define NB_MIN      60u          /* ethernet minimum, padded */

static u8 s_our_mac[6];
static u8 s_peer_mac[6];
/* Last descriptor ring_next() looked at, kept for the error path: when a
 * length is rejected, the four raw bytes are the whole diagnosis. */
static u8 s_last_desc[4];
static u8 s_last_dump[32];
static u32 s_last_page;

static u16 rd16(const u8 *p) { return ((u16)p[0] << 8) | p[1]; }
static void wr16(u8 *p, u16 v) { p[0] = (u8)(v >> 8); p[1] = (u8)v; }

/* ── RX: pull one frame out of the SPRAM ring ────────────────────────────
 * The ring is pages 1-15 with a 4-byte descriptor at each page start whose
 * length field INCLUDES the descriptor.  RRP is ours to advance; the
 * gateware does not act on it. */
/* Pages the writer is ahead of us, over the 15-page ring. */
static u32 ring_lag(u32 rpage, u32 wpage)
{
	return (wpage >= rpage) ? (wpage - rpage) : (wpage + 15u - rpage);
}

static int ring_next(u8 *buf, u32 cap)
{
	u8 rp[2], wp[2], hdr[4];
	u32 rpage, wpage, dlen, flen, addr;

	if (bba_read(REG_RRP_LO, rp, 2) < 0) return -1;
	if (bba_read(REG_RWP_LO, wp, 2) < 0) return -1;
	rpage = ((u32)rp[1] << 8) | rp[0];
	wpage = ((u32)wp[1] << 8) | wp[0];
	if (rpage == wpage) return 0;                 /* empty */
	if (rpage < 1 || rpage > 15) return -2;       /* pointer corrupt */

	/* THE RING HAS NO OVERFLOW PROTECTION.  Nothing in the gateware consumes
	 * RRP, so RXFrameAssembler keeps writing and laps us: the real BBA has
	 * RBFI for this and we do not.  Reading from a page the writer has
	 * already reused yields a "descriptor" that is really frame data -- which
	 * is where 00 00 00 01 came from, not a dropped write.
	 *
	 * Our poll loop costs ~5 EXI transactions per frame (~200 us) while a
	 * 100 Mbit link delivers a 342-byte frame every ~30 us, and the ring is
	 * only 15 pages, so under continuous traffic we lose that race.  Bail out
	 * once the writer is more than two thirds of the ring ahead: the data we
	 * would read is not trustworthy, and resyncing is strictly better than
	 * parsing someone else's bytes. */
	if (ring_lag(rpage, wpage) > 10) return -4;

	addr = rpage << 8;
	if (bba_stream((u16)addr, hdr, 4) < 0) return -1;
	memcpy(s_last_desc, hdr, 4);
	s_last_page = rpage;
	/* Keep the head of the page for the error path.  Guessing at a 4-byte
	 * descriptor has already cost several round trips; 32 bytes shows
	 * whether an ethernet header is present and AT WHAT OFFSET, which
	 * settles "bad length" versus "reading the wrong place" outright. */
	if (bba_stream((u16)addr, s_last_dump, sizeof(s_last_dump)) < 0)
		return -1;
	dlen = ((u32)hdr[2] << 8) | hdr[3];
	if (dlen <= 4 || dlen > 1518 + 4) return -3;  /* descriptor implausible */
	flen = dlen - 4;
	if (flen > cap) flen = cap;

	/* Descriptor + frame are contiguous from the page start.  Read both and
	 * drop the descriptor rather than streaming from a mid-page address, so
	 * one DMA read covers it. */
	{
		static u8 tmp[1536 + 4];
		u32 want = dlen;
		if (want > sizeof(tmp)) want = sizeof(tmp);
		if (bba_stream((u16)addr, tmp, want) < 0) return -1;
		memcpy(buf, tmp + 4, flen);
	}

	/* Advance RRP by the pages this frame occupied, wrapping 1..15. */
	{
		u32 pages = (dlen + 255) >> 8;
		u32 next = ((rpage - 1 + pages) % 15) + 1;
		if (bba_w8(REG_RRP_LO, (u8)next) < 0) return -1;
	}
	return (int)flen;
}

static int send_ack(u16 seq)
{
	u8 f[NB_MIN];
	memset(f, 0, sizeof(f));
	memcpy(f + 0, s_peer_mac, 6);
	memcpy(f + 6, s_our_mac, 6);
	wr16(f + 12, NB_ETHERTYPE);
	f[14] = 'G'; f[15] = 'C'; f[16] = 'U'; f[17] = 'P';
	f[18] = NB_OP_ACK;
	wr16(f + 20, seq);
	wr16(f + 22, 0);
	wr16(f + 24, 0);
	return bba_tx_bytes(f, sizeof(f));
}

/* Destination path carried in the DONE frame, so the host decides where the
 * build lands rather than it being baked in here. */
static char s_dest[64] = "/gc_bba_test.dol";

const char *netboot_dest_path(void) { return s_dest; }

int netboot_receive(void *dst, u32 maxlen, void (*status)(const char *msg))
{
	static u8 frame[1536];
	u8 *out = (u8 *)dst;
	u32 got = 0, nblocks = 0, bad = 0, seen = 0, lapped = 0;
	u16 expect = 0;
	char line[80];
	u64 t0;
	int have_peer = 0;

	/* Bring the device up deterministically rather than hoping someone else
	 * already did.  Pressing Z straight after launch is the normal case, and
	 * then NOTHING has issued the NCRA reset that triggers the W5100's own
	 * init -- MACRAW is not running, no frames are stored, and this would sit
	 * in "timeout: no frames" for a reason that has nothing to do with the
	 * transfer.  Swiss may have initialised it, or an earlier test may have,
	 * or neither; a reset here makes all three cases identical.
	 *
	 * The reset also clears the SPRAM ring pointers, which is what we want:
	 * a clean ring with RRP == RWP == page 1, so the first frame we see is
	 * genuinely the host's first block. */
	if (status) status("resetting the adapter...");
	if (bba_w8(REG_NCRA, NCRA_RESET) < 0) return -1;
	{
		int i, v = -1;
		for (i = 0; i < 50; i++) {
			v = bba_r8(REG_NCRA);
			if (v >= 0 && !(v & NCRA_RESET)) break;
			usleep(5000);
		}
		if (i == 50) {
			if (status) status("NCRA reset never self-cleared");
			return -1;
		}
		/* The W5100 re-inits behind that: RSTn pulse plus a 60.3 ms settle,
		 * done twice.  Polling it sooner reads all-zeros and looks dead. */
		usleep(400000);
	}
	/* Start receive.  Without the SR bit the assembler never writes the
	 * ring, so frames arrive at the W5100 and go nowhere. */
	if (bba_w8(REG_NCRA, NCRA_SR) < 0) return -1;

	/* Establish a KNOWN ring state instead of trusting what we inherited.
	 * Swiss initialises the BBA before launching us and writes RRP itself,
	 * and an NCRA reset does not restore the register file's copy of either
	 * pointer -- their init values only apply at FPGA configuration.  So
	 * RRP can legitimately be anything, including 0, which is outside the
	 * ring (pages 1-15) and used to abort the whole transfer.
	 *
	 * Setting RRP = RWP declares the ring empty and consistent, whatever it
	 * was, so the first frame we read is genuinely the host's first block. */
	{
		u8 wp[2];
		if (bba_read(REG_RWP_LO, wp, 2) < 0) return -1;
		if (wp[0] < 1 || wp[0] > 15) {
			/* RWP is the gateware's own pointer, so this should not
			 * happen -- say so loudly rather than papering over it. */
			if (status) { snprintf(line, sizeof(line),
			              "RWP=%u outside ring pages 1-15", wp[0]);
			              status(line); }
			return -5;
		}
		if (bba_w8(REG_RRP_LO, wp[0]) < 0) return -1;
		if (status) { snprintf(line, sizeof(line),
		              "ring synced at page %u", wp[0]); status(line); }
	}

	/* PAR0-5 survives the reset (it is the gateware's power-on MAC), and it
	 * is read AFTER the reset so the source address we put in ACKs is the
	 * one the adapter is actually filtering on. */
	if (bba_read(REG_PAR0, s_our_mac, 6) < 0) return -1;

	if (status) {
		status("waiting for host (send-dol.py)...");
		status("NOTE: quiet the link first, or other traffic laps the ring:");
		status("  sudo ./scripts/gc-testlink.sh up <iface>");
	}
	t0 = gettime();

	for (;;) {
		int n = ring_next(frame, sizeof(frame));
		if (n == -4) {
			/* Lapped.  Skip to the writer and carry on; with stop-and-wait
			 * the host simply retransmits the block we just threw away. */
			lapped++;
			if (lapped <= 3 && status)
				status("ring lapped (too much other traffic) - resyncing");
			{
				u8 wp[2];
				if (bba_read(REG_RWP_LO, wp, 2) < 0) return -1;
				if (wp[0] >= 1 && wp[0] <= 15)
					bba_w8(REG_RRP_LO, wp[0]);
			}
			continue;
		}
		if (n == -3) {
			/* A descriptor we cannot make sense of must NOT kill the
			 * transfer.  The ring collects EVERYTHING on the wire --
			 * mDNS, IPv6 RAs, ARP from the host -- so pressing Z on a
			 * live network hits stray frames long before the sender
			 * starts.  Log the first few, resync, and carry on. */
			bad++;
			if (bad <= 3 && status) {
				int i;
				snprintf(line, sizeof(line),
				         "skip bad descriptor at page %u: %02X %02X %02X %02X",
				         (unsigned)s_last_page, s_last_desc[0],
				         s_last_desc[1], s_last_desc[2], s_last_desc[3]);
				status(line);
				for (i = 0; i < 32; i += 16) {
					snprintf(line, sizeof(line),
					    "  +%02X %02X %02X %02X %02X %02X %02X %02X %02X "
					    "%02X %02X %02X %02X %02X %02X %02X %02X", i,
					    s_last_dump[i+0], s_last_dump[i+1], s_last_dump[i+2],
					    s_last_dump[i+3], s_last_dump[i+4], s_last_dump[i+5],
					    s_last_dump[i+6], s_last_dump[i+7], s_last_dump[i+8],
					    s_last_dump[i+9], s_last_dump[i+10], s_last_dump[i+11],
					    s_last_dump[i+12], s_last_dump[i+13], s_last_dump[i+14],
					    s_last_dump[i+15]);
					status(line);
				}
			}
			if (bad > 200) {
				if (status) status("too many bad descriptors - giving up");
				return -2;
			}
			/* Resync to the gateware's own pointer and keep waiting. */
			{
				u8 wp[2];
				if (bba_read(REG_RWP_LO, wp, 2) < 0) return -1;
				if (wp[0] >= 1 && wp[0] <= 15)
					bba_w8(REG_RRP_LO, wp[0]);
			}
			continue;
		}
		if (n < 0) {
			/* Report the pointers, not just the code: -1 is an EXI access
			 * failure, -2 an RRP outside the ring, -3 a descriptor whose
			 * length is implausible.  Which one it is, and what the
			 * pointers read, is the whole diagnosis. */
			u8 rp[2] = {0xFF, 0xFF}, wp[2] = {0xFF, 0xFF};
			bba_read(REG_RRP_LO, rp, 2);
			bba_read(REG_RWP_LO, wp, 2);
			if (status) {
				snprintf(line, sizeof(line),
				         "ring error %d (RRP=%u RWP=%u) %s", n, rp[0], wp[0],
				         n == -1 ? "EXI access failed" :
				         n == -2 ? "RRP outside pages 1-15" :
				                   "descriptor length implausible");
				status(line);
				snprintf(line, sizeof(line),
				         "  page %u descriptor = %02X %02X %02X %02X",
				         (unsigned)s_last_page, s_last_desc[0],
				         s_last_desc[1], s_last_desc[2], s_last_desc[3]);
				status(line);
			}
			return -2;
		}
		if (n == 0) {
			/* 30 s with nothing at all, or 5 s mid-transfer, is a bail-out
			 * rather than a hang -- a wedged update must not require a
			 * console power cycle. */
			u32 idle = (u32)ticks_to_millisecs(diff_ticks(t0, gettime()));
			if (idle > (got ? 5000u : 30000u)) {
				if (status) {
				snprintf(line, sizeof(line),
				         "%s (%u seen, %u bad desc, %u lapped)",
				         got ? "timeout mid-transfer" : "timeout: no match",
				         (unsigned)seen, (unsigned)bad, (unsigned)lapped);
				status(line);
			}
				return -3;
			}
			continue;
		}
		seen++;
		if ((u32)n < NB_HDR) continue;
		if (rd16(frame + 12) != NB_ETHERTYPE) {
			/* Dump the first non-matching frame.  If the sender is running
			 * and nothing matches, the bytes show whether the body is
			 * offset -- the ethertype would appear at 11 or 13 instead of
			 * 12. */
			if (seen == 1 && status) {
				snprintf(line, sizeof(line),
				         "frame 1 (%d B) etype=%04X at 12; "
				         "%02X %02X %02X %02X %02X %02X %02X %02X",
				         n, rd16(frame + 12), frame[0], frame[1], frame[2],
				         frame[3], frame[4], frame[5], frame[6], frame[7]);
				status(line);
			}
			continue;
		}
		if (frame[14] != 'G' || frame[15] != 'C' ||
		    frame[16] != 'U' || frame[17] != 'P') continue;

		if (!have_peer) { memcpy(s_peer_mac, frame + 6, 6); have_peer = 1; }
		t0 = gettime();

		if (frame[18] == NB_OP_DONE) {
			/* DONE may carry the destination path as its payload. */
			u16 plen = rd16(frame + 24);
			if (plen && plen < sizeof(s_dest) && NB_HDR + plen <= (u32)n) {
				memcpy(s_dest, frame + NB_HDR, plen);
				s_dest[plen] = 0;
			}
			if (status) { snprintf(line, sizeof(line),
			                       "received %u bytes in %u blocks",
			                       (unsigned)got, (unsigned)nblocks);
			              status(line); }
			return (int)got;
		}
		if (frame[18] != NB_OP_DATA) continue;

		{
			u16 seq = rd16(frame + 20);
			u16 len = rd16(frame + 24);
			nblocks = rd16(frame + 22);
			if (len > NB_BLOCK_MAX || NB_HDR + len > (u32)n) continue;

			if (seq == expect) {
				if (got + len > maxlen) {
					if (status) status("image larger than buffer");
					return -4;
				}
				memcpy(out + got, frame + NB_HDR, len);
				got += len;
				expect++;
				if ((expect & 0x1F) == 0 && status) {
					snprintf(line, sizeof(line), "block %u/%u (%u KB)",
					         (unsigned)expect, (unsigned)nblocks,
					         (unsigned)(got >> 10));
					status(line);
				}
			}
			/* ACK even a duplicate: it means our previous ACK was lost, and
			 * re-ACKing is what lets the host move on. */
			send_ack(seq);
		}
	}
}

/* ── DOL loader ──────────────────────────────────────────────────────────
 * 7 text + 11 data sections, each with a file offset, load address and size,
 * then BSS and the entry point.  All big endian. */
typedef struct {
	u32 text_off[7];
	u32 data_off[11];
	u32 text_addr[7];
	u32 data_addr[11];
	u32 text_len[7];
	u32 data_len[11];
	u32 bss_addr;
	u32 bss_len;
	u32 entry;
	u32 pad[7];
} dolhdr_t;

/* Reserved region at the top of MEM1:
 *
 *   [ staged image .............. ][ stub ][ descriptor ][ new stack ]
 *   ^ s_stage                      ^ s_stub
 *
 * Nothing here may overlap any DOL section, and netboot_launch() checks that
 * before it jumps rather than trusting it. */
#define NB_STAGE_MAX   (6u << 20)      /* generous: Swiss is ~2-3 MB */
#define NB_TAIL        (64u << 10)     /* stub + descriptor + stack */

extern void nb_stub(void *desc);
extern void nb_stub_end(void);

static u8 *s_stage;
static u8 *s_tail;

void *netboot_reserve(u32 *out_max)
{
	u32 hi = (u32)SYS_GetArena1Hi();
	u32 base = (hi - (NB_STAGE_MAX + NB_TAIL)) & ~31u;

	if (base <= (u32)SYS_GetArena1Lo()) return NULL;
	s_stage = (u8 *)base;
	s_tail  = (u8 *)(base + NB_STAGE_MAX);
	/* Tell libogc this is not its memory any more. */
	SYS_SetArena1Hi(s_stage);
	if (out_max) *out_max = NB_STAGE_MAX;
	return s_stage;
}

static int overlaps(u32 a, u32 alen, u32 b, u32 blen)
{
	if (!alen || !blen) return 0;
	return a < b + blen && b < a + alen;
}

int netboot_launch(const void *dol)
{
	const dolhdr_t *h = (const dolhdr_t *)dol;
	const u8 *base = (const u8 *)dol;
	u32 reserved = (u32)s_stage;
	u32 reserved_len = NB_STAGE_MAX + NB_TAIL;
	u32 stub_len = (u32)((const u8 *)nb_stub_end - (const u8 *)nb_stub);
	u32 *desc;
	void (*stub)(void *);
	int i, nsec = 0;

	if (!s_stage) return -1;

	/* Refuse a mis-parsed or truncated header rather than jumping into it:
	 * a bad jump hangs the console hard enough to need a power cycle. */
	if ((h->entry >> 24) != 0x80 || h->text_len[0] == 0 ||
	    (h->text_addr[0] >> 24) != 0x80)
		return -2;

	/* Build the copy table in the reserved tail, where the image cannot
	 * reach it.  While doing so, verify no section lands on the reserved
	 * region -- that would clobber the staged image, the stub we are about
	 * to run from, or this very table. */
	desc = (u32 *)(s_tail + 0x1000);
	for (i = 0; i < 7; i++) {
		if (!h->text_len[i]) continue;
		if (overlaps(h->text_addr[i], h->text_len[i], reserved, reserved_len))
			return -3;
		desc[5 + nsec * 3 + 0] = (u32)(base + h->text_off[i]);
		desc[5 + nsec * 3 + 1] = h->text_addr[i];
		desc[5 + nsec * 3 + 2] = h->text_len[i];
		nsec++;
	}
	for (i = 0; i < 11; i++) {
		if (!h->data_len[i]) continue;
		if (overlaps(h->data_addr[i], h->data_len[i], reserved, reserved_len))
			return -3;
		desc[5 + nsec * 3 + 0] = (u32)(base + h->data_off[i]);
		desc[5 + nsec * 3 + 1] = h->data_addr[i];
		desc[5 + nsec * 3 + 2] = h->data_len[i];
		nsec++;
	}
	if (h->bss_len &&
	    overlaps(h->bss_addr, h->bss_len, reserved, reserved_len))
		return -3;

	desc[0] = h->entry;
	/* Hand the new image a stack inside the reserved tail, 64-byte aligned
	 * and clear of the descriptor. */
	desc[1] = ((reserved + reserved_len) - 64) & ~63u;
	desc[2] = (u32)nsec;
	desc[3] = h->bss_addr;
	desc[4] = h->bss_len;

	/* Relocate the copier out of harm's way and make it executable there. */
	stub = (void (*)(void *))s_tail;
	memcpy(s_tail, (const void *)nb_stub, stub_len);
	DCFlushRange(s_tail, NB_TAIL);
	ICInvalidateRange(s_tail, NB_TAIL);

	/* No interrupts from here on: we are about to overwrite the memory this
	 * program is running from, and the scheduler must not preempt us into
	 * code that no longer exists. */
	IRQ_Disable();
	stub(desc);
	return 0;               /* not reached */
}

/* ── SD card: save the new build, then boot a known-good image ───────────
 * The update deliberately does NOT launch what it just received.  It writes
 * the image to the card and then boots /boot.dol (Swiss), so a broken test
 * build is recoverable: Swiss comes up regardless and can load the previous
 * one.  The only image we ever jump into is one that was already known good. */

static int s_sd_mounted;

static int sd_mount(void (*status)(const char *msg))
{
	/* Try every interface a GameCube might have.  Auto-detecting beats
	 * asking: SD Gecko can be in either memory-card slot, and SD2SP2 is on
	 * its own EXI channel. */
	static const struct { const char *name; const DISC_INTERFACE *io; } ifs[] = {
		{ "SD2SP2",         &__io_gcsd2 },
		{ "SD Gecko slot B", &__io_gcsdb },
		{ "SD Gecko slot A", &__io_gcsda },
	};
	unsigned i;
	char line[64];

	if (s_sd_mounted) return 0;
	for (i = 0; i < sizeof(ifs) / sizeof(ifs[0]); i++) {
		if (fatMountSimple("sd", ifs[i].io)) {
			if (status) {
				snprintf(line, sizeof(line), "SD mounted (%s)", ifs[i].name);
				status(line);
			}
			s_sd_mounted = 1;
			return 0;
		}
	}
	if (status) status("no SD card found (SD2SP2 or SD Gecko)");
	return -1;
}

/* Build "<base>.tmp" and "<base>.prev.dol" from "<base>.dol".
 *
 * The temp file deliberately does NOT end in .dol: Swiss lists .dol files, and
 * a half-written image that Swiss offers to boot is exactly what we are trying
 * to prevent.  The backup DOES end in .dol, because booting it from Swiss is
 * the whole point of keeping it. */
static void derive_names(const char *path, char *tmp, size_t ntmp,
                         char *prev, size_t nprev)
{
	char base[80];
	size_t n = strlen(path);

	if (n >= sizeof(base)) n = sizeof(base) - 1;
	memcpy(base, path, n);
	base[n] = 0;
	if (n > 4 && strcasecmp(base + n - 4, ".dol") == 0)
		base[n - 4] = 0;

	snprintf(tmp,  ntmp,  "sd:%s.tmp", base);
	snprintf(prev, nprev, "sd:%s.prev.dol", base);
}

int netboot_sd_write(const char *path, const void *buf, u32 len,
                     void (*status)(const char *msg))
{
	char final[96], tmp[112], prev[112], line[160];
	FILE *f;
	u32 done;
	int rc = 0;

	if (sd_mount(status) < 0) return -1;
	snprintf(final, sizeof(final), "sd:%s", path);
	derive_names(path, tmp, sizeof(tmp), prev, sizeof(prev));

	/* Write to a TEMP file and verify it BEFORE touching the existing
	 * build.  Ordering matters: if the transfer, the write or the verify
	 * fails, the copy you are running from is still on the card untouched,
	 * so you can always try the update again.  Only once the new image is
	 * known good do we rotate. */
	if (status) { snprintf(line, sizeof(line), "writing %s", tmp); status(line); }
	f = fopen(tmp, "wb");
	if (!f) { if (status) status("open for write failed"); return -2; }
	done = (u32)fwrite(buf, 1, len, f);
	fclose(f);
	if (done != len) {
		remove(tmp);
		if (status) status("short write - existing build left alone");
		return -3;
	}

	/* Read it back.  A half-written .dol that still parses is the failure
	 * this design exists to avoid, and the card is the one component here
	 * with no other integrity check. */
	if (status) status("verifying...");
	f = fopen(tmp, "rb");
	if (!f) { remove(tmp); if (status) status("reopen for verify failed"); return -4; }
	{
		static u8 chunk[4096];
		const u8 *src = (const u8 *)buf;
		u32 off = 0;
		while (off < len) {
			u32 want = len - off;
			if (want > sizeof(chunk)) want = sizeof(chunk);
			if (fread(chunk, 1, want, f) != want) { rc = -5; break; }
			if (memcmp(chunk, src + off, want) != 0) { rc = -6; break; }
			off += want;
		}
	}
	fclose(f);
	if (rc < 0) {
		remove(tmp);
		if (status) status("VERIFY FAILED - existing build left alone");
		return rc;
	}

	/* Rotate: keep exactly one generation back.  remove()/rename() of a
	 * file that is not there is fine and ignored -- that is just the first
	 * update on a fresh card. */
	remove(prev);
	rename(final, prev);
	if (rename(tmp, final) != 0) {
		/* Should not happen, but if it does the old build is sitting in
		 * .prev.dol and is still bootable from Swiss -- say so rather
		 * than leaving the user to guess. */
		if (status) {
			snprintf(line, sizeof(line),
			         "rename failed; previous build is at %s", prev);
			status(line);
		}
		return -7;
	}

	if (status) {
		snprintf(line, sizeof(line), "wrote %u bytes; previous build kept as %s",
		         (unsigned)len, prev);
		status(line);
	}
	return 0;
}

int netboot_boot_file(const char *path, void *dst, u32 maxlen,
                      void (*status)(const char *msg))
{
	char full[96], line[128];
	FILE *f;
	long sz;
	u32 got;

	if (sd_mount(status) < 0) return -1;
	snprintf(full, sizeof(full), "sd:%s", path);

	f = fopen(full, "rb");
	if (!f) {
		if (status) { snprintf(line, sizeof(line), "%s not found", full);
		              status(line); }
		return -2;
	}
	fseek(f, 0, SEEK_END);
	sz = ftell(f);
	fseek(f, 0, SEEK_SET);
	if (sz <= 0 || (u32)sz > maxlen) {
		fclose(f);
		if (status) status("boot image size implausible");
		return -3;
	}
	got = (u32)fread(dst, 1, (size_t)sz, f);
	fclose(f);
	if (got != (u32)sz) {
		if (status) status("short read of boot image");
		return -4;
	}

	if (status) { snprintf(line, sizeof(line), "booting %s (%u bytes)",
	                       full, (unsigned)got); status(line); }

	/* Unmount before we disable interrupts and jump: leaving the card
	 * mounted hands the next image a filesystem that libfat still thinks it
	 * owns, on an EXI channel it is about to reinitialise. */
	fatUnmount("sd");
	s_sd_mounted = 0;

	return netboot_launch(dst);
}