Roflin
2eba68a013
First time one of this session's RX faults has been reproducible on this side
rather than inferred from a console.
T9 performs EXI DMA reads from the SPRAM ring WHILE the ethernet side writes
frames into it. No earlier test did: T6 waits for the frame to complete before
reading, so reads and writes never overlapped -- and ETH has ABSOLUTE priority
in SPRAMArbiter, so only under that overlap can an EXI read be preempted.
EXI_HALF=8 6/6 byte-exact
EXI_HALF=2 6/6 byte-exact
EXI_HALF=1 2/6 byte-exact <-- the hardware rate
2-of-6 matches the console ratio closely (desc@+0=100 +1=343, 23% good), and
the corruption is exactly the hardware symptom -- ONE EXTRA BYTE inserted at
the front, shifting everything:
expected: 00 00 00 0C DE AD BE EF
got: 00 00 00 00 0C DE AD BE
That it is INSERTED rather than wrong is the useful part: an extra push into
the tx FIFO is a COUNT mismatch in the request/response path, not corrupted
SPRAM data. It only shows at 27 MHz because the read has to complete inside
the protocol's turnaround window while ETH preempts it.
This is the bug to chase first, ahead of the residual ACK retries: netboot
only works because its reader probes both offsets. Swiss does not probe -- it
would read a frame length of 1 -- so real networking on this adapter is broken
while our own tooling reports success.
bba_top now FAILS at EXI_HALF=1, deliberately. The failure is real and the
test is the reproduction; do not relax T9 to make the suite green. HALF=8 and
HALF=2 still pass for unrelated work.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>