Roflin
5f7f20db43
Remaining after the bit-phase fix was a SPEED-DEPENDENT failure -- the GC read
correctly at 1/2/4/8/16 MHz and failed only at index 5 (27 MHz), returning
0B 80 = 0x17 late by exactly ONE bit. Opposite signature to the phase slip it
was hiding under, and this one really is propagation delay.
MISO is source-synchronous: driven on the falling edge, sampled by the GC on
the next rising edge, so the whole path must fit a HALF period -- 18.5 ns at
27 MHz -- minus global-buffer insertion, pad, connector and the GC's setup.
The failing build measured ~10.5 ns of that internally. Critical path:
clk-to-q 1.39 tx_shift (3,12)
routing 3.60 tx_shift[7] (3,12) -> (5,5) to the CS mux
logic 1.21 Mux(cs_n, 1, ...) LUT
routing 4.79 miso (5,5) -> (17,0) to the J4 MISO pad
10.99 ns (2.60 logic, 8.39 routing)
Two removals, both of things that were pure cost here:
1. EXI_J4 is GONE entirely (exi_j4.py, the resource, the AND merge, the docs
section, scripts/pi-exi-wirecheck.py) -- recoverable from git history. The
AND put a LUT in the CLOCK path, denying the EXI clock pad its dedicated
global-buffer route, and MISO fanned out to the J4 pad at die (17,0) which
was the far end of the critical output path: 4.79 ns of routing to a header
with nothing plugged into it. 10.2-11.5 ns -> 9.3-9.6 ns.
2. The Mux(cs_n, 1, ...) LUT is gone from the MISO data path. It only parked
MISO high when deselected, which the flop's own reset value does for free:
tx_shift now has init=0xFF and CS is that domain's async reset, so MISO is
tx_shift[7] with nothing in between. Removes 1.21 ns of logic plus the
3.60 ns route feeding it and lets the placer sit the flop by the pad.
synth.py now PARSES AND RANKS BY the MISO clock-to-pad delay. Ranking by fmax
was how a board that failed at 27 MHz passed every seed at >=1.29x margin --
fmax was never the binding constraint for this design.
--seeds 8: clk 28.7-32.5 MHz, EXI 49.6-62.1 MHz, MISO 8.38-10.22 ns, 8/8 PASS.
Best seed 8 (clk 30.35, EXI 49.56, MISO 8.38 ns), flashed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>