Roflin
a16d6f0432
Hardware dump: "frame 1 (110 B) etype=6c86 at 12: 72 33 33 00 00 00 16 00".
33 33 00 00 00 16 is an IPv6 MLDv2 multicast MAC from the host, but it sits at
offset ONE, behind a leading 0x72 -- and 0x72 is 114, the low byte of the
W5100's MACRAW 2-byte length prefix. Hence 6c86 at offset 12: the last byte
of the source MAC and the first of 86DD, both one byte late.
An earlier dump in the SAME build read FF FF FF FF FF FF 00 2B, perfectly
aligned. Two frames, one build, different alignment -- that is a lapped read
of a partially overwritten page, not a systematic off-by-one. The alignment
fix is intact.
Two self-inflicted costs removed from the poll loop, whose speed is exactly
what decides whether the writer laps us:
- The 32-byte hex dump ran on EVERY frame, adding an EXI transaction per
iteration. The diagnostic was making the fault it was diagnosing worse.
It now runs only when a descriptor is actually rejected.
- RRP was re-read from the device every poll, costing another transaction
for a value we had just written ourselves. It is now tracked locally and
kept in step at the three places that move it.
That takes the per-frame cost from six EXI transactions to four. It does not
make the race winnable on a busy link -- the ring is 15 pages and has no
overflow protection -- but it stops me handing back a loop that is slower than
the one that produced the measurement.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>