Lets a bench host drive EXI without the SP1 edge connector, for bring-up.
Merges a second set of EXI pads onto the existing ones rather than repinning,
so the SP1 connector stays live and the default build is untouched. The three
inputs are AND-merged, which is correct because every EXI input is inactive
HIGH (CPOL=1 clk, active-low cs_n, mosi only matters while cs_n is low): the
unplugged side idles at 1 through its SB_IO PULLUP and passes the other side
through, so no select signal is needed. Outputs drive both pads.
All five J4 pads are on the same bottom die edge as the EXI pads (x=13..18 vs
x=5..9), so the capture domain keeps its anchor. It still adds 3 LUTs ahead of
the input synchronisers, so EXI_J4 builds must sweep seeds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Roflin
c0abd45518