The whole GC init sequence now runs over EXI on the real board: device ID,
NCRA reset self-clear, PAR0-5, MAR, ANALOG, NWAYC, IMR, NCRA SR, NWAYS 0x17.
GC->wire TX does not complete. Not an EXI fault and not tx_bytes depth --
8-byte frames fail too, and the UART shell's own UDP send hangs the same way,
so the W5100 bus master is stuck and TXFrameDrain is waiting on it.
Also records that id_phase is a one-shot cleared by the first NCRA reset, so
a re-run probe reads 00 00 00 00 for the device ID and looks broken.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Roflin
2b210dc5e3